Hanging a single internal door typically costs around 80 to 150 pounds in labour, plus the door itself. That assumes the existing frame is sound and reasonably square. Where the frame has to be replaced or the opening has moved over the years, the job becomes carpentry rather than fitting, and the price rises accordingly.
What hanging a door actually involves
The door is measured against the real opening, which is rarely square in an older house, then trimmed on the correct edges, hinges are recessed, and the door is hung and adjusted so the gap is even and it closes without catching. Handles and latches are then fitted and set to line up.
Why prices vary so much
A modern hollow core door in a straight frame is quick. A heavy oak or solid fire door in a Victorian opening takes far longer, needs more hinges and more careful trimming, and a wider trim margin means more risk of getting it wrong.
- Solid and fire doors cost more to hang than hollow core
- New frame or lining adds noticeably to the labour
- Several doors at once cost less each than one on its own
- Painting and trim are usually priced separately
Fire doors and rented property
Fire doors in flats and licensed rented property have to be fitted to the correct specification, including the right hinges, closers and intumescent seals. That is not a corner to cut, and it is priced honestly rather than fudged.
Doing several at once
If a house needs four or five doors, do them in one booking. The setup, tools and dust protection are handled once and the per-door cost drops.
Typical costs
| Item | Typical range | Notes |
|---|---|---|
| Hang one internal door, existing frame | 80 to 150 pounds | Sound, roughly square opening |
| Several doors, same visit | 70 to 120 pounds each | Setup shared across the job |
| New lining or frame fitted | 150 to 300 pounds | Plus making good |
| Ease and adjust a sticking door | From 60 pounds | Often part of a handyman visit |
Labour guidance. Doors, handles and paint are additional.